Solved: Hi,The remote site should be

aleopoldie · ‎09-23-2015

Hello experts,

I am installing a FlexConnect solution and i'm wondering why do we need to configure native vlan on the Flexconnect AP's and on the switch ?

AL

Sandeep Choudhary · ‎09-25-2015

Hi,

The remote site should be a trunk with the ap management as the native vlan(This is how cisco recommanded).

The AP's management IP must be be on the native Vlan. There is no way around at the moment and you can't have all your vlan's tagged as the AP has to be on the native Vlan.

Regards

View solution in original post

Sandeep Choudhary · ‎09-25-2015

Hi,

The remote site should be a trunk with the ap management as the native vlan(This is how cisco recommanded).

The AP's management IP must be be on the native Vlan. There is no way around at the moment and you can't have all your vlan's tagged as the AP has to be on the native Vlan.

Regards

aleopoldie · ‎09-30-2015

Hi Sandeep,

Ok many thanks for your answer.

Regards,

FlexConnext questions