12-05-2020 08:51 AM - edited 07-05-2021 12:52 PM
Hi,
I'm looking for a way to test our newly renewed guest portal SSL cert. I'm wondering how to delete my mobile device's MAC from the ISE database and "start from scratch" so to speak.
Thanks in advance.
12-05-2020 11:12 AM
If you go to Context Visibiity -> End points , you can remove those MAC addresses, then you can start the process like a new client
HTH
Rasika
12-06-2020 07:30 AM
Thanks Rasika - I followed your steps and chose to "forget" the network from my device and re-connected to our guest network and no captive portal appeared - it simply allowed me to browse as per normal.
12-08-2020 04:56 AM
Do you use the ISE captive portal or another solution? If another one, don't forget to also delete the client there.
Also disable the wifi for 30 seconds on the client after you have deleted it, so it makes a complete new handshake. You might even need to delete it directly on the WLC in some cases.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide