cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
652
Views
5
Helpful
5
Replies
diegoarmando
Beginner

Framed MTU RADIUS Authentication Failed on WLC 9800

Framed.jpg

 

 

 We are implementing a WLC 9800 with RADIUS authentication, but we need to change the Framed MTU to 1300, default set is 1485

on WLC 5508 it was possible in RADIUS authentication server global configuration,

does anyone know where it can be modified in the WLC 9800?

Thanks!

1 ACCEPTED SOLUTION

Accepted Solutions
patoberli
VIP Advisor

Couldn't find anything in the docs, besides the documentation that this feature was added in 8.1 for older WLC.

You might want to open a TAC, it's possible that this isn't supported yet. 

View solution in original post

5 REPLIES 5
patoberli
VIP Advisor

Couldn't find anything in the docs, besides the documentation that this feature was added in 8.1 for older WLC.

You might want to open a TAC, it's possible that this isn't supported yet. 

View solution in original post

marce1000
VIP Advisor

 

                                                                - Can you do it on the cli with :

           

(Cisco Controller) > config radius auth framed-mtu 1300

M. 

that command is for WLC 5508, im looking for a WLC 9800,

 

Thanks!

marce1000
VIP Advisor

 

 - On CLI use : radius-server attribute ?

                        Check if any options returned relate to framed mtu settings.

 M.

diegoarmando
Beginner

We opened a case in TAC and they mention that it is not yet supported in the 9800 version


Thanks for you support

Content for Community-Ad