Giving static IP to wireless AP from core switch

[lachimi-sanyasi]

Hi Folks,

I will start with my network infrastructure.  I have a WLC and it has around 50 APs on it with different profiles.

Long story short. currently, APs are getting IP from the core switch where the DHCP server is created. I have noticed that when the APs restart the IP address is changing on them. I want to give the fixed Ip to these APS. how can I do that? Do I need to reserve Ip one by one with AP's mac address from the core switch where the DHCP server is running for them at present? How to do this, please?

[marce1000]

  - Why do you want fixed ip addresses  , you can also have a DHCP pool with available addresses on the DHCP server  for the subnet used by APs , 

 M.

[lachimi-sanyasi]

That is because APs IP keeps on changing every time APs ae rebooted.

[marce1000]

  - This has no functional impact for wireless operations and servicing , 

 M.

[lachimi-sanyasi]

Yes but I am told to reserve IP for each APs. In that case how to do?

[marce1000]

  - On the DHCP server you will usually have an address pool  with available addresses for APs ;  you must only make sure that the pool is big enough to accommodate and allocate addresses for all APs you intend to use,

 M.

[lachimi-sanyasi]

can you please give me example how do I create DHCP Pool for this APs with mac address?

[marce1000]

  - Creating a DHCP pool depends on the type (model/brand) of DHCP server being used ; for Cisco take a look at this
     example : https://www.manageengine.com/network-configuration-manager/configlets/configure-dhcp-server-cisco.html

    M.

[Rich R]

https://community.cisco.com/t5/switching/how-to-reserve-a-specific-mac-address-in-the-existing-cisco-dhcp/td-p/4046515