General approach!
Detect the source device to absolutely make sure its actual Rogue AP or Client with bad driver, otherwise we're following an incorrect target.
Once source confirmed and its neighbor/next door AP, just talk to them to disable containment, its violation to contain the rogues.
Client with bad driver can send packet as if it were an AP - Src/Dst traffic flipped by client causing unnecessary issues. in this case, we need to work with client vendor.
Check the performance impact - Many clients do ignore broadcast deauth. If spoofer sending bcast deauth and found no impact then there is no need to counter-attack.
Also, counter-attack/Rogue-containment will have impact on client connected to that containing AP-radio.
