Guest SSID time limit EWC

[ThomasHankiewicz1]

Hello

I am trying to setup a guest SSID with a timeout of 4 hours on Cisco 9120x AP configured as an EWC. Is there a way to do it ? Cisco instructions tell me to do it under the advanced tab under Configuration > Tags & Profiles > WLANs but there is no advanced tag there.I am running code 17.12.3

[marce1000]

  - Have a look here : https://www.cisco.com/c/en/us/td/docs/wireless/controller/9800/technical-reference/c9800-best-practices.html#clienttimer

  M.

[Rich R]

There are a number of different timeouts so you need to be clear about which timeout you are referring to.
As @marce1000  says - check the Best Practices and check the Configuration Guide for more details too.
If you mean the absolute session timeout then it is also matters how the users are authenticated - because they could just re-associate again straight away.

Refer to TAC recommended code versions link below and consider keeping up to date with that.

[Saikat Nandy · Accepted solution]

I reckon you are talking about session timeout. If yes, please look into the Configuration > Tags & Profiles > Policy > Advanced.

[ThomasHankiewicz1]

Thanks for all your relies. I was not in advanced mode and switching helped