02-12-2011 06:37 PM - edited 07-03-2021 07:48 PM
I've deployed a Cisco 1142 in locally switched H-Reap mode and both 2.4GHz and 5GHz is working but I'm not getting 802.11n speeds. Any Ideas or settings I can check?
Sent from Cisco Technical Support iPhone App
Solved! Go to Solution.
02-12-2011 07:18 PM
Hi,
Whats the WLAN security configured?? N can be acheived by using Either Open Auth with no encryption with all MCS rates enabled and WMM enabled.. OR with WPA2 -AES as the auth-encryption with MCS and WMM enabled.
are we using the same??
lemme know if this answered your question..
Regards
Surendra
====
Please dont forget to rate the posts which answered your question and mark it as answered or was helpfull
02-12-2011 07:18 PM
Hi,
Whats the WLAN security configured?? N can be acheived by using Either Open Auth with no encryption with all MCS rates enabled and WMM enabled.. OR with WPA2 -AES as the auth-encryption with MCS and WMM enabled.
are we using the same??
lemme know if this answered your question..
Regards
Surendra
====
Please dont forget to rate the posts which answered your question and mark it as answered or was helpfull
02-13-2011 02:40 AM
I did not have WMM enabled. Thanks for the help
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide