cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
893
Views
0
Helpful
2
Replies
jan.b.brooks
Beginner

H-Reap 1142 802.11n

I've deployed a Cisco 1142 in locally switched H-Reap mode and both 2.4GHz and 5GHz is working but I'm not getting 802.11n speeds. Any Ideas or settings I can check?

Sent from Cisco Technical Support iPhone App

1 ACCEPTED SOLUTION

Accepted Solutions
Surendra BG
Cisco Employee

Hi,

Whats the WLAN security configured?? N can be acheived by using Either Open Auth with no encryption with all MCS rates enabled and WMM enabled.. OR with WPA2 -AES as the auth-encryption with MCS and WMM enabled.

are we using the same??

lemme know if this answered your question..

Regards
Surendra
====
Please dont forget to rate the posts which answered your question and mark it as answered or was helpfull

Regards
Surendra BG

View solution in original post

2 REPLIES 2
Surendra BG
Cisco Employee

Hi,

Whats the WLAN security configured?? N can be acheived by using Either Open Auth with no encryption with all MCS rates enabled and WMM enabled.. OR with WPA2 -AES as the auth-encryption with MCS and WMM enabled.

are we using the same??

lemme know if this answered your question..

Regards
Surendra
====
Please dont forget to rate the posts which answered your question and mark it as answered or was helpfull

Regards
Surendra BG

View solution in original post

I did not have WMM enabled. Thanks for the help

Create
Recognize Your Peers
Content for Community-Ad