H-REAP AIR-LAP1141N

[keynet]

Hello

I configured air-lap1141 in h-reap mode. After this change the ap disappear from the controller and com back after a short time repeatedly. In local mode the ap works fine. The air-lap1242 ap don't have this problem. This behavior exist by version 5.2.157 and 5.2.178.

Does anyone knows the problem?

Regards

Pascal

[mike-greene]

Hi,

Sounds like bug that I saw in software 5.2.178 on the 2106 WLC. We had to download a beta version of 5.2.178.16 to get it working because the major release of code is delayed until the end of June.

If I find the bug ID in my email later I'll post it but I remember it not being available for the public to view at that time.

HTH

[mike-greene]

Here is the link to the bug ID. Still looks like it's not available to the public and I seem to remember it only affects 1141 AP's which were the AP's I was having the issues with.

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsx58514