07-21-2010 02:57 PM - edited 07-03-2021 06:59 PM
Has anyone setup a Workgroup Bridge on a remote H-REAP site and got it working? I have the AP associated to the controller but the AP cannot ping the controller and the controller cannot see the wired clients on the AP.
07-22-2010 06:21 AM
WGB associations to a H-REAP AP is not supported
http://www.cisco.com/en/US/docs/wireless/controller/7.0/configuration/guide/c70lwap.html#wp1156655
05-29-2011 07:19 AM
Hi,
Are you still facing this issue? If not could you please mark the Question as Answered.
thanks,
Vinay
09-03-2013 11:57 AM
Hello, yes we current have many WGB's connected to FlexConnect LAP's. Support for connecting to FlexConnect LAP's (formerly H-REAP) has been added in WLC Code 7.3. Please refer to release notes: http://www.cisco.com/en/US/docs/wireless/controller/release/notes/crn73.html
Thank you.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide