12-14-2011 07:46 AM - edited 07-03-2021 09:14 PM
Hello,
In the WLC there are two groups (say A and B). How would I take group B and point it to a RADIUS server for authentication please? Looking for a step by step answe please. The server is ping reachable. I have seached but did not see any difinitive answer.
Thanks!
12-14-2011 08:05 AM
I should add that the RADIUS box's IP is in the WLC. I guess I'm just looking for how to make group "B" go through the RADIUS server for authentication please.
12-14-2011 09:53 AM
at the moment, the only way to do this is on a per SSID basis if you really want seperation.
now, that being said, If user B does not exist in the domain of AAA -A, then it will not respond, or at least not with a reject. After the third attempt, the WLC should send the request to AAA-B.
HTH,
Steve
----------------------------------------------------------------------------------------------------------
Please remember to rate helpful posts or to mark the question as answered so that it can be found later.
08-27-2012 12:05 AM
You can achieve what you want per WLAN.
configure authentication servers order in wlan settings as per this image:
HTH
Amjad
You want to say "Thank you"?
Don't. Just rate the useful answers,
that is more useful than "Thank you".
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide