01-09-2019 03:42 PM - edited 07-05-2021 09:40 AM
Hello there, hoping someone can point us in the right direction.
We have a Cisco 2500 Series Wireless controller that pushes out the WLANs which use the dhcp scope on the WLC we use which were setup for us when the WLC was originally configured.
We want to do some testing to create a new WLAN with a new larger dhcp scope and would like some guidance to see if we are on the right path. The steps we think we have to follow are:
1. Create the new DHCP scope
2. create a new interface with a different VLAN Identifier and ip address in the same range as the new dhcp scope.
3. Create the new WLAN assigning the new Interface created in step 1 (so making sure it uses the new dhcp scope)
I realise the above is a very simplistic description but we just wanted to make sure we are on the right path.
Many thanks
01-09-2019 03:58 PM
01-09-2019 04:30 PM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide