12-24-2020 08:54 PM - edited 07-05-2021 12:56 PM
Issue: some of AP3802 ping so high.
The wlc 2504 version 8.5.161.0. On the wlc web page-wireless-all aps-ap5~8 both display radio1 is down and not support.
AP Name | Type | interface power inline | SSID | 2.4G | 5G | PING gateway | PING Internet | Operation |
AP1 | 1832i | 15W | test | up | up | 1~2stable | 20~40 stable | / |
AP2 | 1832i | 15W | test | up | up | 1~2stable | 20~40 stable | / |
AP3 | 1832i | 15W | test | up | up | 1~2stable | 20~40 stable | / |
AP4 | 1832i | 15W | test | up | up | 1~2stable | 20~40 stable | / |
AP5 | 3802i | 30W | test | up | down | 1~2stable | 20~40stable | change cables and interface |
AP6 | 3802i | 30W | test | up | down | 50~200unstable | 75~2000unstable | ditto |
AP7 | 3802i | 30W | test | up | down | 50~200unstable | 75~2000unstable | ditto |
AP8 | 3802i | 30W | test | up | down | 50~200unstable | 75~2000unstable | ditto |
12-24-2020 09:25 PM
12-25-2020 02:00 AM
Yes,I found that products 3802i and 1832i are from different regions.
What can I do now.Add the both codes at wireless-country-selection or change something in the APs 3802i ?
12-26-2020 11:01 AM
12-29-2020 04:43 AM
As you say have been resolved, there is a new problem, the client response is slow while roaming. How to disable the situation where the signal is good but the rate is very low, such as showing that 5Mbps actually cannot access the Internet.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide