hotel wifi solution

[ekadsoft1]

we need to construct wifi network for new hotel consists of 10 floors ;each floor have 48 room.

how can we make perfect coverage for each floor ?

which devices should we use ( AP , switches , WLC, and etc.) ?

how can I make site survey to plan this network ? I need tools from Cisco.

note : maximum capacity 1500 users ; also I well attach the hotel blueprint.

[Rasika Nayanajith · Accepted solution]

Refer this document to start with

http://www.wlanpros.com/wp-content/uploads/2015/06/Rules-for-Successful-Hotel-Wi-Fi.pdf

how can I make site survey to plan this network ? I need tools from Cisco.

Then you need to do a site survey for a suitable AP model that fulfill customer requirement. You can use tool like Ekahau. There are no cisco tools for this.

http://www.ekahau.com/wifidesign/ekahau-site-survey

From this forum, you cannot expect a solution design for your customer requirement, but can get some advice for specific concerns you have.

HTH

Rasika

*** Pls rate all useful responses ***

[mohanak]

Do a site survey:http://www.cisco.com/networkers/nw03/presos/docs/CLP-1030.pdf

[Joshua Messenger]

Although best practice is to perform a wireless survey to find the noise floor and interference within a building.  If you need to estimate at a high level the number of access points for generic coverage take a look at:

http://baud9600.com/Calculators/RF-AP-Deployment-Estimator.html