How do I change the AP credentials and Enable password Globally on a C

[willthomas76]

How do I change the AP credentials and Enable password Globally on a Cisco 9800-80 controller? I have tried searching for CLI and GUI instructions. I do not want to do this on a per profile basis. Is there a way to change the username and password including the Enable password on a controller by controller basis?  I want to change to apply to the existing AP's as well as any AP's that join.

The following commands did not work and I could not find the GUI instructions.

config ap mgmtuser add username user password password enablesecret enable_password all

Please help.  I assume its something simple for the GUI as well as CLI.

[marce1000]

                         >...How do I change the AP credentials and Enable password Globally 
         You can't it needs to be done per profile ;  https://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/8-8/b_c9800_wireless_controller_series_web_dg.html#id_90820

 M.

[Rich R]

Put that in your existing profiles for existing APs and in the default profile so any new APs joining get the config immediately before they're assigned to a specific profile.

[Gaurav Kansal]

Hello Thomas

You can change the credentials for AP Globally in 9800 WLC under

Configuration>Tags &Profile > AP Join, here you can create profiles for AP or use default profiles  and create credentials in edit AP join profile.

If you find this helpful pls reply.

Good Luck