How to config Autonomous ap with a open ssid ?

[Rps-Cheers]

Hi Everyone,

Do you know how to config ssid that client associate it don't need type password ?

Here is my configuration, it seems not work...

dot11 ssid test
   guest-mode 

[Karsten Iwen]

have you tried it with the following config-line?

dot11 ssid test
   authentication open

[Karsten Iwen]

dot11 ssid test
   authentication open

[Rps-Cheers]

Yes, i had tried it with "authentiation open" command， but it need type password.

[Scott Fella]

Just search for “Cisco autonomous ap guest ssid” There are tons of guides, blogs and videos on that.

[Rps-Cheers]

before that, i have configured auth key mgmt under inter radio, so i cannot connect ssid.
thanks

[Scott Fella]

Once you get comfortable creating an open then a psk, you will understand some of the co fog line items and what they do. It just takes time to get a good understanding of the configuration.

[Scott Fella · Accepted solution]

Just do a search for "Cisco autonomous open ssid".  You will find many examples and guides to configure your autonomous ap also how the switch needs to be configured, which is also important.

SSID on Autonomous AP Configuration Example - Cisco

[Rps-Cheers]

Hi  Scott

Thanks for your reply, i have find one,it seems useful.

https://www.youtube.com/watch?v=ksoFXYwC248

[Scott Fella]

With autonomous, since its been around for ages, you will find many answers on the internet.  There are more of the old stuff out there than the new stuff.

[Rps-Cheers · Accepted solution]

Yes, i have tried to reconfigure, and working fine.

Here is the simple example:

conf t
dot11 ssid xxx
authen open
guest-mode
inter do0
ssid xxx
inter do1
ssid xxx

Note: we cannot config authen key mgmt under radio interface !