How to configure Cisco Catalyst 9120 for EAP PEAP connection

Sili · ‎07-17-2024

How to configure Cisco Catalyst 9120 for EAP PEAP connection?

I am unable to connect to PEAP configuration. Please help

marce1000 · ‎07-17-2024

>...How to configure Cisco Catalyst 9120 for EAP PEAP connection?
https://www.cisco.com/c/en/us/support/docs/wireless/catalyst-9100-access-points/221127-configure-locally-significant-certificat.html

>..I am unable to connect to PEAP configuration. Please help
Share client logs (too)

M.

-- Each morning when I wake up and look into the mirror I always say ' Why am I so brilliant ? '
When the mirror will then always repond to me with ' The only thing that exceeds your brilliance is your beauty! '

Sili · ‎07-17-2024

what if I want to connect it to Free radius server instead of Microsoft radius server?

marce1000 · ‎07-17-2024

- No direct insights on that ,

M.

-- Each morning when I wake up and look into the mirror I always say ' Why am I so brilliant ? '
When the mirror will then always repond to me with ' The only thing that exceeds your brilliance is your beauty! '

Sili · ‎07-18-2024

Hello ,

Can you point me the procedure to configure the Cisco Catalyst AP 9100 series in WPA2 mode? The configurations I tried are not working.
With continuation to that, I want to configure the same AP in Enterprise mode with external radius server.
Please help.

Rich R · ‎08-03-2024

What type of WLC?
What version of software?
For 9800 series: https://www.cisco.com/c/en/us/td/docs/wireless/controller/9800/17-9/config-guide/b_wl_17_9_cg/m_wlan_security_9800.html

------------------------------
Please click Helpful if this post helped you and Select as Solution (drop down menu at top right of this reply) if this answered your query.
------------------------------
TAC recommended codes for AireOS WLC's and TAC recommended codes for 9800 WLC's
Best Practices for AireOS WLC's, Best Practices for 9800 WLC's and Cisco Wireless compatibility matrix
Check your 9800 WLC config with Wireless Config Analyzer using "show tech wireless" output or "config paging disable" then "show run-config" output on AireOS and use Wireless Debug Analyzer to analyze your WLC client debugs
Field Notice: FN63942 APs and WLCs Fail to Create CAPWAP Connections Due to Certificate Expiration
Field Notice: FN72424 Later Versions of WiFi 6 APs Fail to Join WLC - Software Upgrade Required
Field Notice: FN72524 IOS APs stuck in downloading state after 4 Dec 2022 due to Certificate Expired
- Fixed in 8.10.196.0, latest 9800 releases, 8.5.182.12 (8.5.182.13 for 3504) and 8.5.182.109 (IRCM, 8.5.182.111 for 3504)
Field Notice: FN70479 AP Fails to Join or Joins with 1 Radio due to Country Mismatch, RMA needed
How to avoid boot loop due to corrupted image on Wave 2 and Catalyst 11ax Access Points (CSCvx32806)
Field Notice: FN74035 - Wave2 APs DFS May Not Detect Radar After Channel Availability Check Time
Leo's list of bugs affecting 2800/3800/4800/1560 APs

jagan.chowdam · ‎07-18-2024

The only reference I could find was for AirOS controllers

https://www.cisco.com/c/en/us/support/docs/wireless-mobility/wireless-lan-wlan/211263-Configure-802-1x-PEAP-with-FreeRadius.html

/**Pls rate useful responses**/

Jagan Chowdam