07-26-2017 06:33 AM - edited 07-05-2021 07:25 AM
Hi,
I want to know how to configure one active WLC and two HA (SSO) controllers.
This is required as following :
- If the active WLC goes down, APs will join to the first HA WLC.
- If the first HA WLC goes down - while the active WLC remains down- , APs will join the second HA WLC.
Thanks in advance
07-26-2017 01:58 PM
If the first HA WLC goes down - while the active WLC remains down- , APs will join the second HA WLC.
This.Does.Not.Make.Any.Sense.
07-26-2017 11:59 PM
The case is like the following :
- One active WLC is working now, and it has some issues that will need to fix.
- One HA WLC is working as SSO.
- we need to stop the active one, for sure APs will join the HA WLC.
- Then, we need to have redundant WLC and it should be HA WLC as well.
So how can I configure one active WLC and two HA WLC (SSO\Standby)
07-26-2017 11:59 PM
Enable primary/secondary/tertiary controller details on a per-AP basis.
07-27-2017 12:24 AM
How will the license inherit from the active controller?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide