How to convert CAPWAP/Mobility Express to LWAPP on Aironet 1832

[fnp2003]

Hi, 

I need guide convert from CAPWAP 8.151.0 to LWAPP or Mobility Express to LWAPP on Cisco Aironet 1832i?

Anyone have guide ?

Thanks.

[ammahend]

https://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/8-2/b_Mobility_Express_Deployment_guide/b_Mobility_Express_Deployment_guide_chapter_01100.html?referring_site=RE&pos=4&page=https://www.cisco.com/c/en/us/support/wireless/mobility-ex...

[marce1000]

 - FYI : https://www.youtube.com/watch?v=-Eh9gJt0rFo&t=363s

 M.

[fnp2003]

I just try that. I means, I have Aironet AP 1832 want to convert LWAPP firmware ap1g4-k9w8-tar.153-3.JPL. Because I want Aironet AP1832 connect to Cisco Catalyst AP9120AX EWC as controller. So im confusing try convert from CAPWAP firmware 8.5.151.0 to LWAPP ap1g4-k9w8-tar.153-3.JPL

[Scott Fella]

You need to research more videos and or blogs on Convert Mobility Express to CAPWAP.  CAPWAP is the same as LWAPP per se, they both are images for controller based implementations. Just search the internet... there is a lot of information on this.

Converting a Mobility Express AP into a CAPWAP AP – Write Mem (wrmem.net)

How to convert Mobility Express Image to CAPWAP Image? ~ Network & Security Consultant (kareemccie.com)

[fnp2003 · Accepted solution]

The problem is solving. I just test using command

archive download-sw /reload tftp://<tftp server address>/ap1g4-k9w8-tar.153-3.JPI6a.tar

 from CAPWAP firmware on Cisco Aironet AP1832I after restart, the AP already using LWAPP firmware and the Cisco Aironet AP1832I can join to Cisco Catalyst AP9120AX EWC. For compability need check on matrix

https://www.cisco.com/c/en/us/td/docs/wireless/compatibility/matrix/compatibility-matrix.html