12-26-2013 06:13 AM - edited 07-04-2021 11:51 PM
Hello,
I have two sites (A and B), WLC 5508*2, AP3602*8 (site A) and AP3602*5 (site B). On site A I need to use 802.11a only (802.11g admin down). On site B I want to use both bands 802.11a/g. How to resolve this issue?
Merry Christmas
Solved! Go to Solution.
12-26-2013 06:29 AM
You would need need WLC v7.2 or later. You can use a combination of AP Groups and RF profiles to accomplish this.
RF Profiles:
http://www.cisco.com/en/US/docs/wireless/controller/7.4/configuration/guides/wlan/config_wlan_chapter_011100.html
AP Groups
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008073c723.shtml
Sent from Cisco Technical Support iPhone App
12-26-2013 06:29 AM
You would need need WLC v7.2 or later. You can use a combination of AP Groups and RF profiles to accomplish this.
RF Profiles:
http://www.cisco.com/en/US/docs/wireless/controller/7.4/configuration/guides/wlan/config_wlan_chapter_011100.html
AP Groups
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008073c723.shtml
Sent from Cisco Technical Support iPhone App
12-26-2013 07:31 AM
Hello Scott,
thx for reply
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide