How to make Cisco APs work as a repeater

[haedongchan]

hi guys

someone pls advise me that How to make Cisco APs works as a repeater

(example)

AP#1=========NEW AP#1(repeater mode)============PC 

the signal of AP#1 is not enough to reach PC

So I want to set repeater AP in the middle between AP#1 and PC

Q1 : Does NEW AP#1 also need a LAN Cable ?? or just can work as a repeater mode without LAN Cable through the signal of AP#1??

Q2 : Detailed explanation and configuration will be very welcomed 

Thanks guys

[Arshad Safrulla]

There are multiple ways to make this work. With controller and without controller, also there is a dependency on the wireless AP model and if you are running with the controller on the code as well. So provide some more information on your use case and your inventory. 

Attaching the below guides

https://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/8-8/b_mesh_88/b_mesh_88_chapter_010.html

https://www.cisco.com/c/en/us/support/docs/wireless/catalyst-9800-series-wireless-controllers/215100-join-mesh-aps-to-catalyst-9800-wireless.html