Re: How to re-image Embedded AP to Lightweight

thuy.hoang · ‎04-26-2022

How to re-image Embedded AP to Lightweight

Hi Buddies,

I have a Access point C9120. Last time, I have tried to convert it from Lightweight to EWC mode to test. Now I need to convert it back to Lightweight mode, then I just find an only way is run the command "wireless ewc ap ap-type ap-name capwap|ewc", but if I do factory reset, the AP will come to EWC again.

Is there anyone know others way to fresh re-image EWC to Lightweight ?

Thanks.

marce1000 · ‎04-26-2022

- Why do you need factory reset after converting to capwap mode ?

M.

-- Each morning when I wake up and look into the mirror I always say ' Why am I so brilliant ? '
When the mirror will then always repond to me with ' The only thing that exceeds your brilliance is your beauty! '

thuy.hoang · ‎04-26-2022

Hi Marce,

It simply that I just want to test what happen if someone try to factory reset by reset button.

marce1000 · ‎04-26-2022

- The intend of converting to capwap mode , is done by the command as you denoted it, if you do an (additional) factory reset then the AP will be in EWC mode (again), because that is the default factory-mode , so for your usage of the access point, the factory reset should not be done and or avoided.

M.

-- Each morning when I wake up and look into the mirror I always say ' Why am I so brilliant ? '
When the mirror will then always repond to me with ' The only thing that exceeds your brilliance is your beauty! '

Rich R · ‎04-26-2022

Boot to ROMMON and then install the standard CAPWAP image.

------------------------------
Please click Helpful if this post helped you and Select as Solution (drop down menu at top right of this reply) if this answered your query.
------------------------------
TAC recommended codes for AireOS WLC's and TAC recommended codes for 9800 WLC's
Best Practices for AireOS WLC's, Best Practices for 9800 WLC's and Cisco Wireless compatibility matrix
Check your 9800 WLC config with Wireless Config Analyzer using "show tech wireless" output or "config paging disable" then "show run-config" output on AireOS and use Wireless Debug Analyzer to analyze your WLC client debugs
Field Notice: FN63942 APs and WLCs Fail to Create CAPWAP Connections Due to Certificate Expiration
Field Notice: FN72424 Later Versions of WiFi 6 APs Fail to Join WLC - Software Upgrade Required
Field Notice: FN72524 IOS APs stuck in downloading state after 4 Dec 2022 due to Certificate Expired
- Fixed in 8.10.196.0, latest 9800 releases, 8.5.182.12 (8.5.182.13 for 3504) and 8.5.182.109 (IRCM, 8.5.182.111 for 3504)
Field Notice: FN70479 AP Fails to Join or Joins with 1 Radio due to Country Mismatch, RMA needed
How to avoid boot loop due to corrupted image on Wave 2 and Catalyst 11ax Access Points (CSCvx32806)
Field Notice: FN74035 - Wave2 APs DFS May Not Detect Radar After Channel Availability Check Time
Leo's list of bugs affecting 2800/3800/4800/1560 APs
Default AP console baud rate from 17.12.x is 115200 - introduced by CSCwe88390