HTTPS access issue at 3500

[Leftz]

Hi We have wlc 3500. Please see the below. HTTPS is enabled, but why we cannot access via https? Thank you very much. 

[Leftz]

Thank you all for your reply! Sorry for the delay

@Rich R we are going to try it. but the concern is it would cause some additional issue? 

@MHM Cisco World regarding "telnet <WLC3500> port <443>" we got the below message: 

"The remote system refused the connection."

but we can access it by "ssh <WLC3500> port <443>

[MHM Cisco World]

https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-6/configuration-guide/b_cg76/b_cg76_chapter_0110010.pdf

Check this link,

If you access via wireless you need to enable it in wlc.

[Leftz]

You are talking about accessing wlc via wireless. what i want to is to access wlc via wire and port443

[MHM Cisco World]

are you use management IP or service port IP?

[Leftz]

management ip