Solved: Re: Hybrid mode in Access Points - Cisco Community

906

Views

5

Helpful

4

Replies

Can we implement Cisco APs as in hybrid mode ?

1 Accepted Solution

Accepted Solutions

Yes it is supported and Cisco calls it FlexConect. Please refer to the following link:

https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-3/config-guide/b_cg83/flexconnect.html

JayBee
ACDX | ACCX| CCIE (RnS/SP,DC) | ACCP | ACMP | ACSA | ACMA | JNCIS | JNCIA | CWNA
If the provided solution resolves your issue, please mark it as accepted solution to help others.

View solution in original post

4 Replies 4

What do you mean by hybrid mode?

JayBee
ACDX | ACCX| CCIE (RnS/SP,DC) | ACCP | ACMP | ACSA | ACMA | JNCIS | JNCIA | CWNA
If the provided solution resolves your issue, please mark it as accepted solution to help others.

where signaling traffic is directed to the controller and data traffic is routed locally

Yes it is supported and Cisco calls it FlexConect. Please refer to the following link:

https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-3/config-guide/b_cg83/flexconnect.html

JayBee
ACDX | ACCX| CCIE (RnS/SP,DC) | ACCP | ACMP | ACSA | ACMA | JNCIS | JNCIA | CWNA
If the provided solution resolves your issue, please mark it as accepted solution to help others.

Thank you Aziz

Learn, share, save

Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.

New here? Get started with these tips. How to use Community New member guide

Log in to Community

Review Cisco Networking for a $25 gift card