cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
567
Views
5
Helpful
1
Replies

Implementing 3850 as MC and 2504 as Guest Anchor Controller

Kenny McLean
Level 1
Level 1

Question,

Am I able to implement a 3850 as the WLC (MC) for the network so that all corporate wifi associates to that, and, have 2x 2504's sat in the DMZ acting as Anchor controllers for all guest wifi connections?

3850 -- 03.07.01E

2504 -- 7.6.130.0

 

1 Accepted Solution

Accepted Solutions

Yes, you should be able to.

You have to enable "new mobility" on your 2504 in order to peer with a 3850. Refer below for config involved.

http://mrncciew.com/2014/05/06/configuring-new-mobility/

Here is latest 2504 deployment guide for your reference

http://www.cisco.com/c/en/us/support/docs/wireless/2500-series-wireless-controllers/113034-2500-deploy-guide-00.html

 

HTH

Rasika

*** Pls rate all useful responses ***

View solution in original post

1 Reply 1

Yes, you should be able to.

You have to enable "new mobility" on your 2504 in order to peer with a 3850. Refer below for config involved.

http://mrncciew.com/2014/05/06/configuring-new-mobility/

Here is latest 2504 deployment guide for your reference

http://www.cisco.com/c/en/us/support/docs/wireless/2500-series-wireless-controllers/113034-2500-deploy-guide-00.html

 

HTH

Rasika

*** Pls rate all useful responses ***

Review Cisco Networking for a $25 gift card