Installation Examples

[Marco Matera]

Does anybody here have installation examples (pictures) especially from a Cisco 2602/2702/2802

with the external antenna AIR-ANT2566P4W-R in a warehouse enviroment and a installation on the ceiling?

Thx in Advance

[pieterh]

maybe the pictures following  this link are interesting for you

(no commercial interest, it is just for the pictures)

[Marco Matera]

hi pieter,

thx for your answer but the antenna case looks more for an a office enviroment.

I am searching  picutres for an warehouse enviroment and different mounting kits.

We installed a lot of 2702e access point with the omni antenna AIR-ANT2524 and i want

to replace the omni antennas against AIR-ANT2566 antenna. 

[patoberli]

You're looking probably for this:
https://www.cisco.com/c/en/us/td/docs/wireless/technology/apdeploy/8-0/Cisco_Aironet_3700AP.html

[Marco Matera]

Hi Patoberli,

no i need real pictures of a warehouse enviorment with racks and Antenna AIR-ANT2566.

Has nobody of you guys some examples (only warehouse or crossdock halls) of your own enviroment?

Example:

 

[patoberli]

Not having a warehouse, so in my case it's a no.

[Mikey Boy]

We are deploying 3 - 4 new warehouses per month at the minute. I do not generally take photos of all of them, however below is a photo of an industrial freezer, around 125,000 square feet.

The AP is mounted in the roof facing downwards into narrow aisle. This building features automated racking, so the aisles are around 60 metres long but actually slide left or right by 2 metres to make an aisle depending on where the stock that requires picking is located. 

AP Part number is AIR-ANT2566P4W-R, AP 2800 series

[Marco Matera]

Thx for the picture it is exactly what i was looking for.

If there are more picutres of the installations or coverage plans of a warehouse with AIR-ANT2566 please reply this post.

Thx in advance.

[PQR]

Hi, thanks for the pictures, a question please

and at what height is the AP with its antenna installed?
What is the maximum height to place this antenna?

[MadLeut355]

hello,

would it be possible to have the part number for this enclosure?

thanks in advance.

[pieterh]

part no's can very per supplier
here is an example: RS PRO Grey Fibreglass Enclosure, IP66, Transparent Lid, 300 x 175 x 185mm | RS (rs-online.com)

just search for waterproof or IP66 enclosure