cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
637
Views
0
Helpful
1
Replies

integrate AIR-CAP1702i-E-K9

riyas2khan
Frequent Visitor
Frequent Visitor

Hi, 

can we manage the AP AIR-CAP1702i-E-K9 through radius desk if we dont have Cisco WLC controller.

if yes could you please guide me through the process or refer the link if already exists. 

1 Reply 1

Rich R
VIP
VIP

I do believe I've answered this for you already on another post but here again:

I have no idea what radius desk is but the answer is still NO.

You can use a regular WLC or Mobility Express running on a Wave 2 AP which operates as a basic WLC.

------------------------------
Please click Helpful if this post helped you and Accept as Solution if this answered your query.
------------------------------
TAC recommended codes for AireOS WLC's   and   TAC recommended codes for 9800 WLC's
Best Practices for AireOS WLC's,   Best Practices for 9800 WLC's   and   Cisco Wireless compatibility matrix
Check your 9800 WLC config with Wireless Config Analyzer using "show tech wireless" output or "config paging disable" then "show run-config" output on AireOS and use Wireless Debug Analyzer to analyze your WLC client debugs
Field Notice: FN63942 APs and WLCs Fail to Create CAPWAP Connections Due to Certificate Expiration
Field Notice: FN72424 Later Versions of WiFi 6 APs Fail to Join WLC - Software Upgrade Required
Field Notice: FN72524 IOS APs stuck in downloading state after 4 Dec 2022 due to Certificate Expired
- Fixed in 8.10.196.0, latest 9800 releases, 8.5.182.12 (8.5.182.13 for 3504) and 8.5.182.109 (IRCM, 8.5.182.111 for 3504)
Field Notice: FN70479 AP Fails to Join or Joins with 1 Radio due to Country Mismatch, RMA needed
Field Notice: FN74383 APs Running 17.12.4/5/6/6a May Run Out of Flash Space Preventing Upgrades
How to avoid boot loop due to corrupted image on Wave 2 and Catalyst 11ax Access Points (CSCvx32806)
Field Notice: FN74035 - Wave2 APs DFS May Not Detect Radar After Channel Availability Check Time
Leo's list of bugs affecting 2800/3800/4800/1560 APs
Default AP console baud rate from 17.12.x is 115200 - introduced by CSCwe88390
Review Cisco Networking for a $25 gift card