Internal DHCP error in EWC ISR 1131

dimdim12 · ‎02-27-2025

Hi All,

I have a problem when implementing internal DHCP on EWC using the ISR 1131 sdwan router. I configured the internal DHCP correctly but DHCP is not running. When I debug and display errors like this

*Jul 16 20:09:48.554: DHCPD: Reload workspace interface GigabitEthernet0 tableid 0.
*Jul 16 20:09:48.554: DHCPD: Sending notification of DISCOVER:
*Jul 16 20:09:48.555: DHCPD: htype 1 chaddr a81a.f100.2e35
*Jul 16 20:09:48.555: DHCPD: remote id 020a00000a29e57d40000000
*Jul 16 20:09:48.555: DHCPD: interface = GigabitEthernet0
*Jul 16 20:09:48.555: DHCPD: Sending notification of DISCOVER:
*Jul 16 20:09:48.555: DHCPD: htype 1 chaddr a81a.f100.2e35
*Jul 16 20:09:48.555: DHCPD: remote id 020a00000a29e57d40000000
*Jul 16 20:09:48.555: DHCPD: interface = GigabitEthernet0
*Jul 16 20:09:48.555: DHCPD: FSM state change INVALID
*Jul 16 20:09:48.555: DHCPD: Workspace state changed from INIT to INVALID
*Jul 16 20:09:48.555: DHCPD: classname not set in msg
*Jul 16 20:09:48.555: DHCPD: there is no address pool for 10.41.229.125.
*Jul 16 20:09:48.555: DHCPD: there is no address pool for 10.41.229.125.
*Jul 16 20:09:48.555: DHCPD: Sending notification of ASSIGNMENT FAILURE:
*Jul 16 20:09:48.555: DHCPD: htype 1 chaddr a81a.f100.2e35
*Jul 16 20:09:48.555: DHCPD: remote id 020a00000a29e57d40000000
*Jul 16 20:09:48.555: DHCPD: interface = GigabitEthernet0
*Jul 16 20:09:48.556: DHCPD: Sending notification of ASSIGNMENT_FAILURE:
*Jul 16 20:09:48.556: DHCPD: due to: NO POOL
*Jul 16 20:09:48.556: DHCPD: htype 1 chaddr a81a.f100.2e35
*Jul 16 20:09:48.556: DHCPD: remote id 020a00000a29e57d40000000
*Jul 16 20:09:48.556: DHCPD: interface = GigabitEthernet0

as additional info, the IP Management of the WLC and AP is different from the dhcp pool that I created, the WLC and AP use Vlan 100 while the dhcp pool uses vlan 103, both gateways are configured on the sdwan router.
Does the EWC version not support internal dhcp?

marce1000 · ‎02-27-2025

- At first glance it looks like the DHCP pool (or setup) is not correctly defined ; can you post related
statements from the running configuration ?

M.

-- Each morning when I wake up and look into the mirror I always say ' Why am I so brilliant ? '
When the mirror will then always repond to me with ' The only thing that exceeds your brilliance is your beauty! '

Flavio Miranda · ‎02-28-2025

@dimdim12

Internal DHCP server for EWC is not supported.

https://www.cisco.com/c/en/us/td/docs/wireless/controller/ewc/17-3/config-guide/ewc_cg_17_3/dhcp_for_wlans.html

But, I have the impression that you created the DHCP scope on the router 4331? Or did I understood incorrectly?

how 4431 come into play?