12-29-2008 06:23 PM - edited 07-03-2021 04:55 PM
AP 1130 Model AP's IOS has got corrupted and AP is not booting properly its going in to AP: prompt
I have tried to recover the same by following the procedure but unable to recover the same, following is the link is the procedure which I applied
http://www.cisco.com/en/US/docs/wireless/access_point/12.3_8_JA/configuration/guide/s38trb.html
Kindly suggest me any specific procedure for AP 1130 model to recover the IOS form AP: mode.
12-30-2008 06:54 AM
12-30-2008 07:12 AM
my dear
u may try this PDF it is for switches but i am sure u will get an idea how to recover and i am sure it will Work.
Regards.
01-13-2009 09:58 PM
Try TFTPDNLD from the ROMMON.
01-14-2009 02:52 PM
Follow the information on the link below. Just make sure you have the image for the 1130
HTH,
Steve
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide