Re: iot image for for raspberry pi 4 or raspberry pi 3 B+

mehdi-chitta · ‎03-24-2024

hi; can you please help me get the image that work with PL-APP on raspberry pi 4 (or raspberry pi 3 B+), i downloaded the version : "en_I2oT2.0_PL-App_Image.zip" that i found on netacad site, but it didn't work. i was following the document in joined piece and i stopped at page 10, where i couldn't connect the pi to PL-APP, because it didn't get an ip address, although WI-FI and DHCP are activated. Thank you.

Rich R · ‎05-11-2024

@mehdi-chitta please refer to https://www.netacad.com/support for how to get support with Networking Academy issues.

------------------------------
Please click Helpful if this post helped you and Select as Solution (drop down menu at top right of this reply) if this answered your query.
------------------------------
TAC recommended codes for AireOS WLC's and TAC recommended codes for 9800 WLC's
Best Practices for AireOS WLC's, Best Practices for 9800 WLC's and Cisco Wireless compatibility matrix
Check your 9800 WLC config with Wireless Config Analyzer using "show tech wireless" output or "config paging disable" then "show run-config" output on AireOS and use Wireless Debug Analyzer to analyze your WLC client debugs
Field Notice: FN63942 APs and WLCs Fail to Create CAPWAP Connections Due to Certificate Expiration
Field Notice: FN72424 Later Versions of WiFi 6 APs Fail to Join WLC - Software Upgrade Required
Field Notice: FN72524 IOS APs stuck in downloading state after 4 Dec 2022 due to Certificate Expired
- Fixed in 8.10.196.0, latest 9800 releases, 8.5.182.12 (8.5.182.13 for 3504) and 8.5.182.109 (IRCM, 8.5.182.111 for 3504)
Field Notice: FN70479 AP Fails to Join or Joins with 1 Radio due to Country Mismatch, RMA needed
How to avoid boot loop due to corrupted image on Wave 2 and Catalyst 11ax Access Points (CSCvx32806)
Field Notice: FN74035 - Wave2 APs DFS May Not Detect Radar After Channel Availability Check Time
Leo's list of bugs affecting 2800/3800/4800/1560 APs