I tryed to configure ip ACL by a html GUI on 12.3(7)JA2 Aironet. I have found the function quite unuseble. It can configure classes only with IP addresses or only with TCP/UDP port. No combination is allowed. Moreover the TCP port can be used as destination only.
For example it is not possible to create
permit TCP any 10.0.0.0 eq telnet
permit TCP any eq 1720 any
A GUI generated ACLs edited by CLI disappears. So they can't be put onto an interface by the GUI nor be used for QoS policy.
Is it an intend ? I can't understand it.