10-03-2019 05:34 AM - edited 07-05-2021 11:05 AM
We have several iPad devices operating in Kiosk mode, or guided access, connecting to a WPA2/PSK WLAN. These devices are configured to not go to sleep. We have the user idle timeout configured for 86400 secs on the wlan, and the session timeout disabled. We are seeing issues where these devices will just stop communicating, and will stop responding to an ICMP ping. However, on the controller, they show associated and in the run state, with a good connection. Often from the WLC client view, we see last disassocation reason as Device idle. These devices are on the 5GHZ band and have great connection stats as far as RSSI and SnR. We are on controller code 8.5.135. We adjusted the default user idle timeout from 300 secs to 86400, and this seemed to minimize how often this was occurring. Has anyone experienced this? Any input on this is appreciated.
10-03-2019 07:03 AM
- You may want to have a look at the Wireless Debug Analyzer which you can find on the page below ; you may also want to have a look into the Wireless Config Analyzer Express - WCAE and the Wireless Lan Config Analyzer - WLCCA - Download V4.4.12
M.
10-04-2019 08:08 AM
10-04-2019 08:17 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide