01-23-2011 05:52 PM - edited 07-03-2021 07:42 PM
I'm guessing no, but not sure.
Solved! Go to Solution.
01-23-2011 05:57 PM
Autonomous or LWAP IOS? YES.
01-23-2011 06:27 PM
Sure. In autonomous IOS, just enter the following commands in a combo:
1. cryp key generate rsa general-keys modulus 768 (you can enter any value but I like to use 768);
2. Lines below will allow only SSH for telnet session.
line vty 0 15
transport input ssh
01-23-2011 05:57 PM
Autonomous or LWAP IOS? YES.
01-23-2011 06:01 PM
I don't have a radio at my disposal currently, but I'm composing a config file for a site visit tommorrow. Can you show me the commands?
01-23-2011 06:27 PM
Sure. In autonomous IOS, just enter the following commands in a combo:
1. cryp key generate rsa general-keys modulus 768 (you can enter any value but I like to use 768);
2. Lines below will allow only SSH for telnet session.
line vty 0 15
transport input ssh
01-23-2011 06:31 PM
really appreciate it--thank you.
01-23-2011 10:34 PM
Hi,
Below link explain in detail how to enable SSH on AP using GUI / CLI :
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a00805f029f.shtml
If you want enable SSH version 2 in specific, you could issue :
Ap(config)# Ip ssh version 2
Regards,
Madhuri
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide