Hi Leo,
I run the below command to activate and commit the new image.
install add file bootflash:C9800-L-universalk9_wlc.17.12.03.SPA.bin activate commit
After this command the WLC rebooted with new image 17.12.03. Below are some outputs from WLC.
HITTIN-WLC#more bootflash:packages.conf
#! /usr/binos/bin/packages_conf.sh
sha1sum: ac235e74849d55abe65dfffda99982a509305192
sha256sum: 1cb76a2da471ab550f3c9f1d1da2389a229cc8d06c0dbe735aae16c121606e02
# sha1sum above - used to verify that this file is not corrupted.
#
# package.conf: provisioned software file for build 2024-03-20_16.00
#
# NOTE: Editing this file by hand is not recommended. It is generated
# as part of the build process, and is subject to boot-time
# consistency checks. Automatically-produced package files are
# guaranteed to pass those checks. Manually-maintained ones are
# not. Because "nfs" and "mount" directives are processed first,
# regardless of their position in the file, the recommended
# approach is to keep a separate file containing JUST your
# personal "nfs" and "mount" directives, and to append it to the
# automatically-generated file.
#
# Note further that when SHA-1 checksum verification is enabled,
# you will NOT be able to alter this file without updating the
# SHA-1 sum.
#
# This file can contain three types of entries:
#
#
# NFS directives (optional)
# notes: NFS directives are processed before all others (mount, iso).
# Multiple NFS directives may appear so long as they do not
# conflict -- that is, specify the same source or mountpoint.
# syntax: nfs <IP ADDRESS>:<REMOTE_PATH> <LOCAL_MOUNTPOINT>
# example: nfs 127.0.0.1:/auto/some/nfs/path /auto/some/nfs/path
#
#
# mount directives (optional)
# notes: mount directives are processed after 'nfs' and before 'iso'.
# One mount directive may appear for each F/S/B/P tuple
# syntax: mount FRU SLOT BAY PACKAGE_NAME NFS_PATH
# example: mount rp 0 0 rp_base /auto/some/nfs/path/abs_soft/rp_base.ppc
#
# The specified NFS_PATH must
# reference the NFS mounts created earlier.
#
# Mount directives cause the package-specific mount link to
# be set to the specified path instead of to the mountpoint
# in sw for the corresponding ISO.
#
#
# iso directives (mandatory)
# notes: iso directives are processed last: any package for which
# a 'mount' directive does not appear will be mounted.
# One iso directive may appear for each F/S/B/P tuple.
# syntax: iso FRU SLOT BAY PACKAGE_NAME PACKAGE_FILE.bin
# example: iso rp 0 0 rp_base rp_base.ppc.bin
#
# PACKAGE_FILE.bin is a path relative to the packages.conf
# file. Although it supports sub-directories for development
# purposes, in deployment the files will always be managed
# as in the same directory as packages.conf so as to
# guarantee that name collisions cannot occur.
#
# Note that the RP 0/1 distinction is a convenience for development
# and testing as it allows us to have a packages.conf describe a
# SW load that varies depending on whether the RP finds itself in
# slot 0 or 1.
#
# The ISSU process *must* update *both* RP slots simultaneously so that
# the RP will behave predictably whichever slot it finds itself on [e.g.,
# if package X is upgraded, and the RP is ejected and put into either
# slot of a new chassis, we expect to see the upgraded X without regard
# to slot].
#
boot rp 0 0 rp_boot C9800-L-rpboot.17.12.03.SPA.pkg
iso rp 0 0 rp_base C9800-L-mono-universalk9_wlc.17.12.03.SPA.pkg
iso rp 0 1 rp_base C9800-L-mono-universalk9_wlc.17.12.03.SPA.pkg
iso rp 0 0 rp_daemons C9800-L-mono-universalk9_wlc.17.12.03.SPA.pkg
iso rp 0 1 rp_daemons C9800-L-mono-universalk9_wlc.17.12.03.SPA.pkg
iso rp 0 0 rp_iosd C9800-L-mono-universalk9_wlc.17.12.03.SPA.pkg
iso rp 0 1 rp_iosd C9800-L-mono-universalk9_wlc.17.12.03.SPA.pkg
iso rp 0 0 rp_security C9800-L-mono-universalk9_wlc.17.12.03.SPA.pkg
iso rp 0 1 rp_security C9800-L-mono-universalk9_wlc.17.12.03.SPA.pkg
iso rp 0 0 rp_webui C9800-L-mono-universalk9_wlc.17.12.03.SPA.pkg
iso rp 0 1 rp_webui C9800-L-mono-universalk9_wlc.17.12.03.SPA.pkg
iso rp 0 0 rp_wlc C9800-L-mono-universalk9_wlc.17.12.03.SPA.pkg
iso rp 0 1 rp_wlc C9800-L-mono-universalk9_wlc.17.12.03.SPA.pkg
iso fp 0 0 fp C9800-L-mono-universalk9_wlc.17.12.03.SPA.pkg
iso cc 0 0 cc C9800-L-mono-universalk9_wlc.17.12.03.SPA.pkg
iso cc 0 0 cc_spa C9800-L-mono-universalk9_wlc.17.12.03.SPA.pkg
iso cc 0 1 cc_spa C9800-L-mono-universalk9_wlc.17.12.03.SPA.pkg
iso cc 0 2 cc_spa C9800-L-mono-universalk9_wlc.17.12.03.SPA.pkg
iso cc 0 3 cc_spa C9800-L-mono-universalk9_wlc.17.12.03.SPA.pkg
#
# -start- superpackage .pkginfo
#
# pkginfo: Name: rp_super
# pkginfo: BuildTime: 2024-03-20_16.00
# pkginfo: ReleaseDate: Wed-20-Mar-24-22:32
# pkginfo: .BuildArch: x86_64
# pkginfo: BootArchitecture: i686
# pkginfo: .BootArch: i686
# pkginfo: RouteProcessor: katar
# pkginfo: Platform: C9800-L
# pkginfo: User: mcpre
# pkginfo: PackageName: universalk9_wlc
# pkginfo: Build: 17.12.03
# pkginfo: .SupportedBoards: katar
# pkginfo: .InstallModel:
# pkginfo: .PackageRole: rp_super
# pkginfo: .RestartRole: rp_super
# pkginfo: CardTypes:
# pkginfo: .CardTypes:
# pkginfo: .BuildPath: /nobackup/mcpre/s2c-build-ws/binos/linkfarm/katar_universalk9_wlc-stage/img/rp_super_universalk9_wlc
# pkginfo: .Version: 17.12.03.0.3740.1710975658..Dublin
# pkginfo: .InstallVersion: 1.0.0
# pkginfo: .InstallCapCommitSupport: yes
# pkginfo: .PKGUID: 0a284704e75332a1f45b0ae95532b411d8de9feb
#
# -end- superpackage .pkginfo
#
****************************************************************************************************************
HITTIN-WLC#show install active
[ Chassis 1/R0 ] Active Package(s) Information:
State (St): I - Inactive, U - Activated & Uncommitted,
C - Activated & Committed, D - Deactivated & Uncommitted
--------------------------------------------------------------------------------
Type St Filename/Version
--------------------------------------------------------------------------------
IMG C 17.12.03.0.3740
--------------------------------------------------------------------------------
Auto abort timer: inactive
--------------------------------------------------------------------------------
HITTIN-WLC#show install committed
[ Chassis 1/R0 ] Committed Package(s) Information:
State (St): I - Inactive, U - Activated & Uncommitted,
C - Activated & Committed, D - Deactivated & Uncommitted
--------------------------------------------------------------------------------
Type St Filename/Version
--------------------------------------------------------------------------------
IMG C 17.12.03.0.3740
--------------------------------------------------------------------------------
Auto abort timer: inactive
--------------------------------------------------------------------------------
The problem is resolved for now, we will monitor the WLC for next week. If there is any thing i will post here
