Re: issue with upload IOS on 1310 Outdoor wifi.

tungvuxuan · ‎08-19-2011

Hello All,

When I uploaded IOS on the 1310, many O characters were appeared :

extracting c1310-k9w7-mx.123-7.JA3/html/level/15/ap_services_stp.shtml.gz (7017 bytes)!!

extracting c1310-k9w7-mx.123-7.JA3/html/level/15/ap_stationview-client_ltest.shtml.gz (5971 bytes)O!

extracting c1310-k9w7-mx.123-7.JA3/html/level/15/ap_system-sw_upgrade-b.htm (225 bytes)

extracting c1310-k9w7-mx.123-7.JA3/html/level/15/ap_system-sw_upgrade-b.shtml.gz (6523 bytes)!

extracting c1310-k9w7-mx.123-7.JA3/html/level/15/ap_system-sw_upgrade.htm (223 bytes)!

extracting c1310-k9w7-mx.123-7.JA3/html/level/15/ap_system-sw_upgrade.shtml.gz (6746 bytes)!

extracting c1310-k9w7-mx.123-7.JA3/html/level/15/ap_system-sw_upgrade_poll.htm (228 bytes)

extracting c1310-k9w7-mx.123-7.JA3/html/level/15/ap_system-sw_upgrade_poll.shtml (3590 bytes)!

extracting c1310-k9w7-mx.123-7.JA3/html/level/15/ap_system-sw_sysconfig.shtml.gz (7154 bytes)!!

extracting c1310-k9w7-mx.123-7.JA3/html/level/15/ap_stationview-client.shtml.gz (5898 bytes)!

extracting c1310-k9w7-mx.123-7.JA3/html/level/15/ap_contextmgr_ap.shtml.gz (4621 bytes)!

extracting c1310-k9w7-mx.123-7.JA3/html/level/15/ap_contextmgr_scm.shtml.gz (5629 bytes)!

extracting c1310-k9w7-mx.123-7.JA3/html/level/15/ap_contextmgr_scm-groups.shtml.gz (8003 bytes)!!

extracting c1310-k9w7-mx.123-7.JA3/html/level/15/ap_contextmgr_scm_summary.shtml.gz (5282 bytes)!

extracting c1310-k9w7-mx.123-7.JA3/c1310-k9w7-mx.123-7.JA3 (3600401 bytes)!!!!!!!!!!!O!!!!!!!!!!!!!!!!!!!!!!O!!!!!!!!!!!!!!!!!!!!!!!O!!!!!!!!!!!!!!!!!!!!!!O!!!!!!!!!!!!!!!!!!!!!!O!!!!!!!!!!!!!!!

!!!!!!!!O!!!!!!!!!!!!!!!!!!!!!!O!!!!!!!!!!!!!!!!!!!!!!!O!!!!!!!!!!!!!!!!!!!!!!O!!!!!!!!!!!!!!!!!!!!!!O!!!!!!!!!!!!!!!!!!!!!!!O!!!!

!!!!!!!!!!!!!!!!!!O!!!!!!!!!!!!!!!!!!!!!!!O!!!!!!!!!!!!!!!!!!!!!!O!!!!!!!!!!!!!!!!!!!!!!O!!!!!!!!!!!!!!!!!!!!!!!O!!!!!!!!!!!!!!!!!!!

!!!O!!!!!!!!!!!!!!!!!!!!!!!O!!!!!!!!!!!!!!!!!!!!!!O!!!!!!!!!!!!!!!!!!!!!!O!!!!!!!!!!!!!!!!!!!!!!!O!!!!!!!!!!!!!!!!!!!!!!O!!!!!!!!!

!!!!!!!!!!!!!!O!!!!!!!!!!!!!!!!!!!!!!O!!!!!O!!!!!!!!!!!!!!!!!!!!!!O!!!!!!!!!!!!!!!!!!!!!!!O!!!!!!!!!!!!!!!!!!!!!!O!!!!!!!!!!!!!!!!

!!!!!!O!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

extracting c1310-k9w7-mx.123-7.JA3/5501.img (131328 bytes)!O!!!!!!!!!!!!!!!!!!!!!!!O!

extracting c1310-k9w7-mx.123-7.JA3/info (274 bytes)!

extracting info.ver (274 bytes)!

[OK - 4382720 bytes]

New software image installed in flash:/c1310-k9w7-mx.123-7.JA3

Configuring system to use new image...done.

Bridge-Root#

I connected Lan cable to 1310 and used the command :

archive download-sw /overwrite tftp://x.x.x.x/...

I 've tried many version:

c1310-k9w7-tar.123-7.JA3.tar ; c1310-k9w7-tar.124-21a.JA1.

tar; c1310-k9w7-tar.123-8.JA2.tar And the result was the same.

Is the 1310 normal when the uploading process is happended like that.

Please give me some advises.

Thank alot.

Surendra BG · ‎08-20-2011

This is expected!! there is no problem in that!!

Regards

Surendra

Regards
Surendra BG

tungvuxuan · ‎08-20-2011

Hello Surendra,

Thank for your response . I have another case, another 1310 with those notifications:

*Mar 1 00:00:03.934: %SOAP_FIPS-2-SELF_TEST_IOS_SUCCESS: IOS HANGED: Interface Dot11Radio0, changed state to administratively down

*Mar 1 00:00:20.281: %SYS-5-CONFIG_I: Configured from memory by console

*Mar 1 00:00:20.284: %SYS-5-RESTART: System restarted --

Cisco IOS Software, C1310 Software (C1310-K9W7-M), Version 12.4(3g)JA1, RELEASE SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Compiled Thu 19-Jul-07 23:32 by kellythw

*Mar 1 00:00:20.284: %SNMP-5-COLDSTART: SNMP agent on host Bridge-03 is undergoing a cold start

*Mar 1 00:00:20.312: %SSH-5-ENABLED: SSH 1.99 has been enabled

*Mar 1 00:00:20.316: Writing radio coredump to 'flash:/r0.rcore'

*Mar 1 00:00:20.712: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0, changed state to up

*Mar 1 00:00:21.466: %LINEPROTO-5-UPDOWN: Line protocol on Interface BVI1, changed state to up

*Mar 1 00:00:21.467: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down

*Mar 1 00:00:35.210: Writing radio coredump to 'flash:/r0.rcore'

Bridge-03#

*Mar 1 00:06:44.924: %SYS-5-CONFIG_I: Configured from console by console

*Mar 1 00:06:44.929: %DOT11-2-RESET_RADIO: Interface Dot11Radio0, Radio boot strap failed, Trying hardware reset on radio

*Mar 1 00:06:46.923: %SYS-3-CPUHOG: Task is running for (1994)msecs, more than (2000)msecs (0/0),process = Dot11 driver.

-Traceback= 0x2D5E4C 0x2D18D8 0x2CCE74 0x4C5548 0x76FE24 0x772B20 0x4CF2B4 0x4D755C 0x18F190

*Mar 1 00:06:48.918: %SYS-3-CPUHOG: Task is running for (3989)msecs, more than (2000)msecs (0/0),process = Dot11 driver.

-Traceback= 0x2D18DC 0x2CCE74 0x4C5564 0x76FE24 0x772B20 0x4CF2B4 0x4D755C 0x18F190

*Mar 1 00:06:50.913: %SYS-3-CPUHOG: Task is running for (5985)msecs, more than (2000)msecs (0/0),process = Dot11 driver.

-Traceback= 0x2D18F8 0x2D18E0 0x4C5564 0x76FE24 0x772B20 0x4CF2B4 0x4D755C 0x18F190

Do you know that error ? Please give me some advises.

Regards.

tung vu.

Surendra BG · ‎08-20-2011

On the device that u observing tracebacks.. paste the show version..

Regards

Surendra

Regards
Surendra BG

tungvuxuan · ‎08-22-2011

Hello Surendra,

This is my IOS version:

ap>

ap>.033: %SYS-5-RESTART: System restarted --

Cisco IOS Software, C1310 Software (C1310-K9W7-M), Version 12.4(21a)JA1, RELEASE SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Compiled Wed 16-Sep-09 18:18 by prod_rel_team

*Mar 1 00:55:44.033: %SNMP-5-COLDSTART: SNMP agent on host ap is undergoing a cold start

*Mar 1 00:55:44.984: %LINEPROTO-5-UPDOWN: Line protocol on Interface BVI1, changed state to up

*Mar 1 00:55:45.001: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down

ap>

*Mar 1 00:55:55.167: %DOT11-2-RESET_RADIO: Restarting Radio interface Dot11Radio0 due to boot strap failed

*Mar 1 00:55:57.162: %SYS-3-CPUHOG: Task is running for (1994)msecs, more than (2000)msecs (0/0),process = Dot11 driver.

-Traceback= 0x2E73F0 0x2E73D0 0x4F7F20 0x7CD360 0x7D007C 0x503814 0x50CDA8 0x1A3B30

*Mar 1 00:55:59.157: %SYS-3-CPUHOG: Task is running for (3990)msecs, more than (2000)msecs (0/0),process = Dot11 driver.

-Traceback= 0x2E73D0 0x2E2680 0x4F7F3C 0x7CD360 0x7D007C 0x503814 0xen50CDA8 0x1A3B30

*Mar 1 00:56:01.152: %SYS-3-CPUHOG: Task is running for (5985)msecs, more than (2000)msecs (0/0),process = Dot11 driver.

-Traceback= 0x2E73F8 0x2E73D0 0x4F7F3C 0x7CD360 0x7D007C 0x503814 0x50CDA8 0x1A3B30

*Mar 1 00:56:02.152: %SYS-3-CPUYLD: Task ran for (6984)msecs, more than (2000)msecs (0/0),process = Dot11 driver

Password:

ap#show verv

*Mar 1 00:56:24.396: %DOT11-2-RESET_RADIO: Restarting Radio interface Dot11Radio0 due to boot strap failed

*Mar 1 00:56:26.390: %SYS-3-CPUHOG: Task is running for (1994)msecs, more than (2000)msecs (0/0),process = Dot11 driver.

-Traceback= 0x2E73D0 0x2E2680 0x4F7F20 0x7CD360 0x7D007C 0x503848 0x50CDA8 0x1A3B30

*Mar 1 00:56:28.385: %SYS-3-CPUHOG: Task is running for (3989)msecs, more than (2000)msecs (0/0),process = Dot11 driver.

-Traceback= 0x2E73D0 0x2E2680 0x4F7F3C 0x7CD360 0x7D007C 0x503848 0xer50CDA8 0x1A3B30

*Mar 1 00:56:30.381: %SYS-3-CPUHOG: Task is running for (5985)msecs, more than (2000)msecs (0/0),process = Dot11 driver.

-Traceback= 0x2E73F0 0x2E73D0 0x4F7F3C 0x7CD360 0x7D007C 0x503848 0x50CDA8 0x1A3B30

*Mar 1 00:56:31.381: %SYS-3-CPUYLD: Task ran for (6984)msecs, more than (2000)msecs (0/0),process = Dot11 driver

^

% Invalid input detected at '^' marker.

ap#show ver

ap#show version

Cisco IOS Software, C1310 Software (C1310-K9W7-M), Version 12.4(21a)JA1, RELEASE SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Compiled Wed 16-Sep-09 18:18 by prod_rel_team

ROM: Bootstrap program is C1310 boot loader

BOOTLDR: C1310 Boot Loader (C1310-BOOT-M) Version 12.3(2)JA4, RELEASE SOFTWARE (fc1)

ap uptime is 2 minutes

System returned to ROM by power-on

System image file is "flash:/c1310-k9w7-mx.124-21a.JA1/c1310-k9w7-mx.124-21a.JA1"

This product contains cryptographic features and is subject to United

States and local country laws governing import, export, transfer and

use. Delivery of Cisco cryptographic products does not imply

third-party authority to import, export, distribute or use encryption.

Importers, exporters, distributors and users are responsible for

compliance with U.S. and local country laws. By using this product you

agree to comply with applicable laws and regulations. If you are unable

to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:

http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to

export@cisco.com.

cisco AIR-BR1310G-A-K9-R (PowerPCElvis) processor (revision A0) with 24566K/8192K bytes of memory.

Processor board ID FTX1120U0AT

PowerPCElvis CPU at 262Mhz, revision number 0x0950

Last reset from power-on

1 FastEthernet interface

1 802.11 Radio(s)

32K bytes of flash-simulated non-volatile configuration memory.

Base ethernet MAC Address: 00:1B:53:13:4D:F0

Part Number : 73-8960-09

PCA Assembly Number : 800-24963-06

PCA Revision Number : A0

PCB Serial Number : FOC11104LMY

Top Assembly Part Number : 800-28763-01

Top Assembly Serial Number : FTX1120U0AT

Top Revision Number : A0

Product/Model Number : AIR-BR1310G-A-K9-R

Configuration register is 0xF

ap#

Surendra BG · ‎08-22-2011

Hi,

I just tot of analyzing it by decoding the tracebacks.. but after seeing the software version that is...124-21a.JA1 , please upgrade ur AP to 12.4(21a)JY or the latest that we have... this will resolve what ever issue that ur facing or may face

Please dont forget to rate the usefull posts!!

Regards

Surendra

Regards
Surendra BG

tungvuxuan · ‎08-23-2011

Hello Surendra,

I 've uploaded 1310's IOS, but the result seem to be the same.

Bridge-Root#reload

Proceed with reload? [confirm]

*Mar 2 18:26:20.134: %SYS-5-RELOAD: Reload requested by console. Reload Reason: Reload Command.Xmodem file system is available.

flashfs[0]: 148 files, 7 directories

flashfs[0]: 0 orphaned files, 0 orphaned directories

flashfs[0]: Total bytes: 7741440

flashfs[0]: Bytes used: 6600704

flashfs[0]: Bytes available: 1140736

flashfs[0]: flashfs fsck took 20 seconds.

Base ethernet MAC Address: 00:1b:53:13:4d:f0

Initializing ethernet port 0...

Reset ethernet port 0...

Reset done!

ethernet link up, 100 mbps, full-duplex

Ethernet port 0 initialized: link is up

Loading "flash:/c1310-k9w7-mx.124-21a.JY/c1310-k9w7-mx.124-21a.JY"...################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################

File "flash:/c1310-k9w7-mx.124-21a.JY/c1310-k9w7-mx.124-21a.JY" uncompressed and installed, entry point: 0x3000

executing...

Restricted Rights Legend

Use, duplication, or disclosure by the Government is

subject to restrictions as set forth in subparagraph

(c) of the Commercial Computer Software - Restricted

Rights clause at FAR sec. 52.227-19 and subparagraph

(c) (1) (ii) of the Rights in Technical Data and Computer

Software clause at DFARS sec. 252.227-7013.

cisco Systems, Inc.

170 West Tasman Drive

San Jose, California 95134-1706

Cisco IOS Software, C1310 Software (C1310-K9W7-M), Version 12.4(21a)JY, RELEASE SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Compiled Wed 28-Apr-10 10:31 by prod_rel_team

Proceeding with system init

Proceeding to unmask interrupts

Initializing flashfs...

flashfs[1]: 148 files, 7 directories

flashfs[1]: 0 orphaned files, 0 orphaned directories

flashfs[1]: Total bytes: 7741440

flashfs[1]: Bytes used: 6600704

flashfs[1]: Bytes available: 1140736

flashfs[1]: flashfs fsck took 4 seconds.

flashfs[1]: Initialization complete....done Initializing flashfs.

Radio0 present A506 5500 E8000000 A0000000 80000000 3

Unable to create Frequency bands, Channel / Max Power information not found