01-10-2020 12:11 AM - edited 07-05-2021 11:31 AM
Hi, I had one problem which I found bypass solution, but I would like to share with someone, as I don't want that someone is wasting time as I did troubleshooting the issue.
My case was that I have 15 APs AP1832i set to Cisco ME, so 1 acts as a call it a "controller", while others are getting the instruction. I have set latest version of firmware for APs - 8.10.105.0
Now I have Nokia 7.1 running Android 10 December 2019 patch, and what I found out that after upgrading Android to version 10 and patching Cisco AP1832i from 8.5 to 8.10, android phone cannot connect anymore.
After 1 hour of troubleshooting I found a bypass. By enabling WPA3 (along with WPA2), android 10 started to connect again.
My guess is either Google completely ditched support for WPA2 (for some reason), in favor for WPA3 or there is some mismatch between Cisco 8.10.105.0 for ME and Google Android 10. By enabling WPA3, phone can successfully connect to our network.
I hope I helped someone, and saved him/her some time in dealing with tedious troubleshooting
Best regards
01-29-2021 01:00 AM
Hi
We had this issue with Android v12 release few days ago.
I confimred we fixed this issue by disabling the FAST TRANSITION feature in our WLANs properties (located in SECURITY/LAYER2 tabs).
We are using Wireless Cisco Catalyst 9800 and AP1840.
Thanks for this discussion thread.
02-01-2021 02:17 AM
Hi,
I have similar Problem with Nokia and Huawei.
Wireless deployment is with 9800-40 and 9115ax - Amsterdam - 17.3.x.
My success workarround is by disabling FT future in WLAN and Device Analyrics.
Disable FT
Configuration > Tags&Profiles > WLAN > Open Problem SSID > Security - Fast Transition (Disabled)
Disable Device Analytics
Configuration > Tags&Profiles > WLAN > Open Problem SSID > Advanced > Advertise Support (Unchecked).
Good Luck !
03-23-2021 02:35 AM
In my case enabling WPA3 on 1832i/1852e with ME 8.10.142.0 wasn't enough. I did also change in WLAN Settings/Advanced 802.11r to "enabled" from default "adaptive". Thanks for this post. It saved me lots of time.
10-04-2022 01:57 AM
Thank you for the solution,
it is a working and effective workaround
however, I don't know why this happened but I guess the suggestion you said about android 10 update is correct
04-18-2023 08:51 AM
Android 10 uses pure WPA3
We solved the issue by creating a separate SSID and following this guide
and it works, our users can choose wpa2/3 or Wpa3 only
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide