Greetings
I have an old 1242 AP that stopped working. We RMA'ed it and jsut got the new one. I placed the old config on the new AP and cannot get it to work. I do not have access to the GUI so I am consoled into the device. We can ping out from the command line of the AP but when I use a PC with net stumbler or even windows tool it will not see the SSID. Can someone take a looka t my config and tell if Im missing something?
AIR-AP1242AG-A-K9
Version 12.4(10b)JA
------------------ show running-config ------------------
Building configuration...
Current configuration : 2270 bytes
!
version 12.4
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec localtime show-timezone
service password-encryption
!
hostname FLoor1
!
enable secret 5 <removed>
!
aaa new-model
!
!
aaa authentication login default local
aaa authorization exec default local
!
aaa session-id common
no ip domain lookup
!
!
!
dot11 ssid MySSID
authentication open
guest-mode
!
power inline negotiation prestandard source
!
!
username Cisco password 7 <removed>
username SSS privilege 15 password 7 <removed>
username WWW privilege 15 password 7 <removed>
username QQQ privilege 15 password 7 <removed>
!
bridge irb
!
!
interface Dot11Radio0
no ip address
no ip route-cache
!
ssid MySSID
!
antenna transmit right
antenna receive right
speed basic-1.0 2.0 5.5 11.0 6.0 9.0 12.0 18.0 24.0 36.0 48.0 54.0
channel 2462
station-role root
rts threshold 2312
world-mode dot11d country US both
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
!
interface Dot11Radio1
no ip address
no ip route-cache
shutdown
dfs band 3 block
channel dfs
station-role root
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
!
interface FastEthernet0
no ip address
no ip route-cache
duplex auto
speed auto
bridge-group 1
no bridge-group 1 source-learning
bridge-group 1 spanning-disabled
!
interface BVI1
ip address 172.XXX.XXX.XXX 255.255.255.0
no ip route-cache
!
ip default-gateway 172.XXX.XXX.1
ip http server
ip http authentication aaa
no ip http secure-server
ip http help-path Http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
ip radius source-interface BVI1
logging 192.160.62.227
snmp-server community <removed> RW
snmp-server community <removed> RO
snmp-server location Ballroo 1 route ip
radius-server attribute 32 include-in-access-req format %h
radius-server vsa send accounting
bridge 1 route ip
!
!
!
line con 0
privilege level 15
line vty 0 4
privilege level 15
line vty 5 15
!
end
I used one of our other AP's connected to the Antenna that this one is using and it works fine. So I know its not the Antenna
Any help would be greatly accepted
thanks
