cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2437
Views
0
Helpful
4
Replies
Breeze Kuriakose
Beginner

keep alive mgs duration of wlc and ap , minimum bandwidth requried to register ap to wlc from remotely

what is the keep alive duration between cisco 1142 ap and 5508 wlc . Can we able to increase it .

How much bandwidth minimum required to register an ap which is in remote brach .

Breeze Joseph Kuriakose Sr Network Engineer
4 REPLIES 4
Scott Fella
Hall of Fame Guru

Here is a good link:

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_white_paper09186a0080901caa.shtml

-Scott
*** Please rate helpful posts ***
Saravanan Lakshmanan
Cisco Employee

AP heart can be configured on WLC. Wireless>> Access  Points>> Global Configuration>> High Availability>>

H REAP WAN Considerations:

http://www.cisco.com/en/US/products/ps10315/products_tech_note09186a0080736123.shtml#WAN

Use the E for Europe, had a few A domain aps come over from time to time and still catch me out!

maldehne
Cisco Employee

If you want to control the heartbeat timers to be fast detect connection failure between AP and WLC, use the following command:

config advanced timers ap-fast-heartbeat {local | hreap | all} 
    {enable | disable} interval
Content for Community-Ad