Keep alive timer is expiring between sup and WISM

[hassan_si]

Dear all,

I am seeing the below log continously.

Jul 19 08:30:26.734 UAE: WiSM-Evt:dman_proc_keepalive_tmr_handler: keepalive timer expired for 8/1

Jul 19 08:30:27.754 UAE: WiSM-Evt:dman_reg_arp_added: cntrl 4/1 got an ip 192.168.10.70 0017.e0a6.6142/0017.e0a6.6142

Jul 19 08:30:34.270 UAE: WiSM-Evt:dman_proc_keepalive_tmr_handler: keepalive timer expired for 3/1

Jul 19 08:30:34.270 UAE: WiSM-Evt:dman_proc_keepalive_tmr_handler: keepalive timer expired for 3/2

Jul 19 08:30:34.270 UAE: WiSM-Evt:dman_proc_keepalive_tmr_handler: keepalive timer expired for 4/2

Jul 19 08:30:34.274 UAE: WiSM-Evt:dman_reg_arp_added: cntrl 8/1 got an ip 192.168.10.90 001d.45ef.a362/001d.45ef.a362

Jul 19 08:30:40.362 UAE: WiSM-Evt:dman_reg_arp_added: cntrl 3/2 got an ip 192.168.10.60 0017.e00c.8b82/0017.e00c.8b82

Jul 19 08:30:41.526 UAE: WiSM-Evt:dman_proc_keepalive_tmr_handler: keepalive timer expired for 8/2

Jul 19 08:30:42.762 UAE: WiSM-Evt:dman_proc_keepalive_tmr_handler: keepalive timer expired for 4/1

Jul 19 08:30:46.526 UAE: WiSM-Evt:dman_reg_arp_added: cntrl 8/2 got an ip 192.168.10.100 001d.45f0.d482/001d.45f0.d482

Jul 19 08:30:46.734 UAE: WiSM-Evt:dman_proc_keepalive_tmr_handler: keepalive timer expired for 8/1

Jul 19 08:30:54.270 UAE: WiSM-Evt:dman_proc_keepalive_tmr_handler: keepalive timer expired for 3/1

Jul 19 08:30:54.270 UAE: WiSM-Evt:dman_proc_keepalive_tmr_handler: keepalive timer expired for 3/2

Jul 19 08:30:54.270 UAE: WiSM-Evt:dman_proc_keepalive_tmr_handler: keepalive timer expired for 4/2

Jul 19 08:30:55.542 UAE: WiSM-Evt:dman_reg_arp_added: cntrl 8/1 got an ip 192.168.10.90 001d.45ef.a362/001d.45ef.a362

Jul 19 08:30:59.266 UAE: WiSM-Evt:dman_reg_arp_added: cntrl 3/1 got an ip 192.168.10.50 0017.e00c.59a2/0017.e00c.59a2

Jul 19 08:31:01.462 UAE: WiSM-Evt:dman_reg_arp_added: cntrl 3/2 got an ip 192.168.10.60 0017.e00c.8b82/0017.e00c.8b82

I would like to know why its happening and how to fix it.

Thanks

[Scott Fella]

What code are you running. If you do a search, you probably can find your answer as this was an issue, but it depends on your code. Search the forum and you will find your answer.

Sent from Cisco Technical Support iPhone App

[Saravanan Lakshmanan]

These debug commands are issued from the router (Sup720) CLI.

     Router#debug wism wcp {data/errors/headers}

     Router#debug wism events

These debug commands can be issued directly from the WiSM CLI.

     WiSM-A#debug wcp {packet/events}

Router#show wism status