lightweight image 1240-k9w8-mx.124-23c.JA

[MARVIN SPITERI]

can I copy the latest image 1240-k9w8-mx.124-23c.JA from a lightweight AP to tftp?

I have 50 autonimous APs that need to be converted to LAP - I have WLC with latest firmware WLC 7.0.98.0 but from CIsco site I could not donwnload the very latest firmware so the process is taking very long for each AP as after the transition to LAP it gets the very latest image from WLC, downloads it in falsh and reboots

I could not find a way to copy this 1240-k9w8-mx.124-23c.JA from LAP .....

[Surendra BG]

Hi Marvin,

Hope you are doing great!!

I tried this process few days back but failed.. however you can try and lemme know..

The process is..

Select the folder where u have to save the image and issue the below command..

AP#archive upload-sw tftp:///

Ex -

AP#archive upload-sw tftp://10.0.0.1/1240-k9w8-mx.124-23c.JA.tar

I guess you wil get a Error stating HTML failed or something.. if we are getting this then i think there is no way we can do this..

However, when the AP registeres to the WLC, it wil download the latest image only..

lemme know if this answered your question..

Regards
Surendra
====
Please dont forget to rate the posts which answered your question and mark it as answered or was helpfull