cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
541
Views
4
Helpful
2
Replies

Login issue with Cisco NAC 3315

jayms1992
Level 1
Level 1

Hi All,

We have an issue with cisco NAC 3315 which is we could not login to the portal through GUI and telner. And when we had a console into the server we have been getting the below error messages . And the server is reachle we are able to ping the server IP.

=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2013.07.01 16:57:08 =~=~=~=~=~=~=~=~=~=~=~=

INIT: cannot execute "/sbin/agetty"

INIT: cannot execute "/sbin/agetty"

INIT: cannot execute "/sbin/agetty"

INIT: cannot execute "/sbin/agetty"

INIT: cannot execute "/sbin/agetty"

INIT: cannot execute "/sbin/agetty"

INIT: cannot execute "/sbin/agetty"

INIT: cannot execute "/sbin/agetty"

INIT: cannot execute "/sbin/agetty"

INIT: cannot execute "/sbin/agetty"

INIT: Id "co" respawning too fast: disabled for 5 minutes

can anybody help us in this issue , ? Thanks in advance.

P.S - The current software version is : 2.0.2.

Regards,

Jayaraman M.S

2 Replies 2

Ravi Singh
Level 7
Level 7

Hello Jaya,

Maybe the following option should be activated in your kernel config ?. Please check and replace with "m"

CONFIG_VIRTIO_CONSOLE=y

Hi Ravi,

Thanks a lot for your quick response in this.

And could you pls confirm where exactly i can check for this option on the server NAC. ?

Regards,

Jayaraman M.S

Review Cisco Networking for a $25 gift card