07-01-2013 09:00 PM - edited 07-04-2021 12:19 AM
Hi All,
We have an issue with cisco NAC 3315 which is we could not login to the portal through GUI and telner. And when we had a console into the server we have been getting the below error messages . And the server is reachle we are able to ping the server IP.
=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2013.07.01 16:57:08 =~=~=~=~=~=~=~=~=~=~=~=
INIT: cannot execute "/sbin/agetty"
INIT: cannot execute "/sbin/agetty"
INIT: cannot execute "/sbin/agetty"
INIT: cannot execute "/sbin/agetty"
INIT: cannot execute "/sbin/agetty"
INIT: cannot execute "/sbin/agetty"
INIT: cannot execute "/sbin/agetty"
INIT: cannot execute "/sbin/agetty"
INIT: cannot execute "/sbin/agetty"
INIT: cannot execute "/sbin/agetty"
INIT: Id "co" respawning too fast: disabled for 5 minutes
can anybody help us in this issue , ? Thanks in advance.
P.S - The current software version is : 2.0.2.
Regards,
Jayaraman M.S
07-01-2013 09:54 PM
Hello Jaya,
Maybe the following option should be activated in your kernel config ?. Please check and replace with "m"
CONFIG_VIRTIO_CONSOLE=y
07-01-2013 10:02 PM
Hi Ravi,
Thanks a lot for your quick response in this.
And could you pls confirm where exactly i can check for this option on the server NAC. ?
Regards,
Jayaraman M.S
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide