05-10-2011 07:25 AM - edited 07-03-2021 08:10 PM
Hi,
I need to know about the flow traffic in the WLC.
I know that the every traffic needs to pass in the WLC, but i need to know if i can change it.
Example :
I have one lwapp ap, but i want to the traffic pass only in this device and after pass to the wired network without pass to the WLC.
Can i do it ?
I need to know too about the options when i'm configuring a AP in the WLC like local, bridge, h-reap, monitor and others.
Thank You.
Solved! Go to Solution.
05-10-2011 08:02 AM
Hi ,
here is the link which tells u more about LWAPP traffic study..
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_white_paper09186a0080901caa.shtml
abd here is the link which explains about modes of operation os AP..
http://www.cisco.com/en/US/docs/wireless/controller/7.0/configuration/guide/c70lwap.html
Lemme know if htis naswered ur question and please dont forget to rate the usefull posts!
Regards
Surendra
05-10-2011 08:02 AM
Hi ,
here is the link which tells u more about LWAPP traffic study..
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_white_paper09186a0080901caa.shtml
abd here is the link which explains about modes of operation os AP..
http://www.cisco.com/en/US/docs/wireless/controller/7.0/configuration/guide/c70lwap.html
Lemme know if htis naswered ur question and please dont forget to rate the usefull posts!
Regards
Surendra
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide