Hi,
we are running SDA with Wireless. Today I enabled Fastlane checkmark under the SSID setup (Design > Network Settings > Wireless), which basically, does the following, as far as I know:
1. changes the EDCA per band from wmm-default to fastlane, if not already changed.
2. It is also supposed to change the port config, but since this is a FIAB switch with Wired QoS config pushed from DNA, I dont think it changes any port config due to fastlane
3. Changes the QoS per SSID/Policy config as below:
======== BEFORE ENABLING FASTLANE on SSID =========
wireless profile policy Guest-LAB_profile
aaa-override
accounting-list dnac-acct-Guest
no central dhcp
no central switching
description Guest-LAB_profile
dhcp-tlv-caching
exclusionlist timeout 180
fabric Guest-LAB_profile
http-tlv-caching
nac
radius-profiling
service-policy input platinum-up < ================= REMOVED
service-policy output platinum < ================= REMOVED
session-timeout 28800
no shutdown
======== AFTER ENABLING FASTLANE on SSID =========
wireless profile policy Guest-LAB_profile
aaa-override
accounting-list dnac-acct-Guest
autoqos mode fastlane < ================= ADDED
no central dhcp
no central switching
description Guest-LAB_profile
dhcp-tlv-caching
exclusionlist timeout 180
fabric Guest-LAB_profile
http-tlv-caching
nac
radius-profiling
session-timeout 28800
no shutdown
So when this is pushed, Mac devices have issues connecting to the network and this is the error I've got:
%QOS_ERROR_MESSAGE-3-QOS_MSG_BLKLIST_CLIENT: Switch 1 R0/0: wncd: Blacklisting client xxxx.6636.xxxx. Error installing client QOS policy: voice-client-avc in Downstream direction.
Aug 21 08:11:00.319: %CLIENT_EXCLUSION_SERVER-5-ADD_TO_EXCLUSION
Have anyone experienced this?
This is a lab Fabric-in-a-Box switch with embedded wireless. It is a 9300 device running 17.9.3 with the respective 9800 image.
