cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
499
Views
0
Helpful
2
Replies
Highlighted
Beginner

MAC Filtering via remote Cisco ACS

Hi folks,

We're using MAC Filtering as part of securing access to a WLAN.  A problem we're facing is the database size on the wireless controllers which is a maximum of 2048 entries.  I want to use our Cisco ACS as a centralised database to overcome this limitation, I understand that this should be possible but am having some difficulty implementing it.  Has anyone done this?  Do you know of any configuration guides for both the controllers/WCS and the ACS?

Many thanks in advance,

Shane.

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted

Hi there

Here you go

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008084f13b.shtml

Sent from Cisco Technical Support iPhone App

"Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin
___________________________________________________________

View solution in original post

2 REPLIES 2
Highlighted

Hi there

Here you go

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008084f13b.shtml

Sent from Cisco Technical Support iPhone App

"Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin
___________________________________________________________

View solution in original post

Highlighted

Thanks George! I couldn't find this anywhere...

Content for Community-Ad