Manage new Aironet 1130 with web browser

[anthonysicoli]

Hello,

I bought a wi-fi Aironet 1130AG, I plug it in my network, it gets an IP address with my DHCP server but I can not manage it with my internet browser, "Internet Explorer can not display this page ". Wifi terminal responds to ping.

Thank you for your help.

Anthony

[Scott Fella]

You need to console into the AP and verify the configuration. If its used, it might have a configuration already. If its new, you should be able to configure that using http/https.

Sent from Cisco Technical Support iPhone App

[Scott Fella]

Here is a link to default your 1130 AP using the mode button.

http://www.cisco.com/en/US/docs/wireless/access_point/1130/installation/guide/113h_c3.html#wp1040300

Sent from Cisco Technical Support iPhone App

[anthonysicoli]

Its a new AP and i tested with an other new AP, it's the same.

[anthonysicoli]

I tried to default my AP using mode button but it's the same. I can't to connect to the AP with web browser and telnet but the AP responds to ping.

[Scott Fella]

I don't know what to say.... you need to cosole into the AP and we can verify that its functional or not.

Thanks,

Scott

Help out other by using the rating system and marking answered questions as "Answered"

[anthonysicoli]

Do I necessarily need to connect with console cable to configure the AP for the first time?

[Scott Fella]

You need to use a console if the web interface isn't working.

Thanks,

Scott

Help out other by using the rating system and marking answered questions as "Answered"

[anthonysicoli]

Ok but when you receive a new AP Aironet 1130 it's normal that you can't access to it with the web browser or not ?

Thanks,

Anthony

[maldehne]

When you recieve brand new AP you should be able to console into it.

Just to evaluate what you really have we need to have console output :

May be the IOS image is corrupted for example.

If after checking the console and making sure that nothing wrong , i would say re-image the AP using console session.

check the following link for more information on how to download ios image to the AP:

http://www.cisco.com/en/US/partner/docs/wireless/access_point/12.4_10b_JA/configuration/guide/scg12410b-chap20-firmware.html#wp1035644

------------------------------------------------------------------------------------------

Please Don't forget to rate correct answers

[anthonysicoli]

Hello,

I have load the ios image but it doesn't work, i can't access to web interface and i haven't all of commands on console with privilege access.

You can see all command i have.

For example, i haven't Configure command.

Thanks

[maldehne]

Then most probably you have downloaded capwap or rcv image

You need to download autonomous IOS, the file name should containt k9w7 not k9w8

-----------------------------------------------------------------------------------------------------------------------------

Please make sure to rate correct answers

[anthonysicoli]

I have download an autonomous IOS because the filename is c1130-k9w7-tar.123-8.JEA3.tar.

I have download it on cisco web site.

[maldehne]

please attach the output of ap#dir flash:

------------------------------------------------------

please make sure to rate correct answers

[anthonysicoli]

Thanks