02-27-2013 02:46 AM - edited 07-03-2021 11:37 PM
Hello,
I bought a wi-fi Aironet 1130AG, I plug it in my network, it gets an IP address with my DHCP server but I can not manage it with my internet browser, "Internet Explorer can not display this page ". Wifi terminal responds to ping.
Thank you for your help.
Anthony
02-27-2013 02:51 AM
You need to console into the AP and verify the configuration. If its used, it might have a configuration already. If its new, you should be able to configure that using http/https.
Sent from Cisco Technical Support iPhone App
02-27-2013 02:53 AM
Here is a link to default your 1130 AP using the mode button.
http://www.cisco.com/en/US/docs/wireless/access_point/1130/installation/guide/113h_c3.html#wp1040300
Sent from Cisco Technical Support iPhone App
02-27-2013 05:28 AM
Its a new AP and i tested with an other new AP, it's the same.
02-27-2013 05:47 AM
I tried to default my AP using mode button but it's the same. I can't to connect to the AP with web browser and telnet but the AP responds to ping.
02-27-2013 07:44 AM
I don't know what to say.... you need to cosole into the AP and we can verify that its functional or not.
Thanks,
Scott
Help out other by using the rating system and marking answered questions as "Answered"
02-27-2013 07:47 AM
Do I necessarily need to connect with console cable to configure the AP for the first time?
02-27-2013 07:53 AM
You need to use a console if the web interface isn't working.
Thanks,
Scott
Help out other by using the rating system and marking answered questions as "Answered"
02-27-2013 08:00 AM
Ok but when you receive a new AP Aironet 1130 it's normal that you can't access to it with the web browser or not ?
Thanks,
Anthony
02-27-2013 09:40 AM
When you recieve brand new AP you should be able to console into it.
Just to evaluate what you really have we need to have console output :
May be the IOS image is corrupted for example.
If after checking the console and making sure that nothing wrong , i would say re-image the AP using console session.
check the following link for more information on how to download ios image to the AP:
------------------------------------------------------------------------------------------
Please Don't forget to rate correct answers
03-12-2013 03:47 AM
Hello,
I have load the ios image but it doesn't work, i can't access to web interface and i haven't all of commands on console with privilege access.
You can see all command i have.
For example, i haven't Configure command.
Thanks
03-12-2013 04:11 AM
Then most probably you have downloaded capwap or rcv image
You need to download autonomous IOS, the file name should containt k9w7 not k9w8
-----------------------------------------------------------------------------------------------------------------------------
Please make sure to rate correct answers
03-12-2013 06:27 AM
I have download an autonomous IOS because the filename is c1130-k9w7-tar.123-8.JEA3.tar.
I have download it on cisco web site.
03-12-2013 06:58 AM
please attach the output of ap#dir flash:
------------------------------------------------------
please make sure to rate correct answers
03-12-2013 09:20 AM
Thanks
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide