09-19-2020 07:36 AM - edited 07-05-2021 12:31 PM
I have a 1832i running ME version 8.5.131. I also have two 3702i APs that are joined and broadcasting the SSID. I have two issues.
The APs are connected to a Meraki MS220 switch, that is currently showing the PoE usage at ~6.3w (advertising 30w AT) for each port.
I would like to get the LEDs in a steady state and also be able to adjust the channel width.
Thank you in advance for any feedback.
Solved! Go to Solution.
09-20-2020 12:40 PM
Thank you Scott for the reply.
I did some more searching and I have the UX APs. These needed to be provisioned to obtain their Country Code. An unprovisioned UX AP will blink Red-Green-Off. After a little bit of struggling with the App, the APs got configured. My Samsung Note9 does not even show the App in Google Play Store. My Samsung Galaxy Tablet has the app, but kept giving me errors, when I try to provision the AP. I ended up using my daughters iPhone.
The APs are now configured for their Country Code. I can now change the channel width of the 3702i APs.
09-19-2020 08:25 AM
09-19-2020 08:40 AM
09-19-2020 08:51 AM
09-20-2020 12:40 PM
Thank you Scott for the reply.
I did some more searching and I have the UX APs. These needed to be provisioned to obtain their Country Code. An unprovisioned UX AP will blink Red-Green-Off. After a little bit of struggling with the App, the APs got configured. My Samsung Note9 does not even show the App in Google Play Store. My Samsung Galaxy Tablet has the app, but kept giving me errors, when I try to provision the AP. I ended up using my daughters iPhone.
The APs are now configured for their Country Code. I can now change the channel width of the 3702i APs.
09-20-2020 03:51 PM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide