12-21-2011 07:16 AM - edited 07-03-2021 09:16 PM
Hi:
I just receive two units of Cisco Small Pro 541N APs
we use 802.1X to authenticate wireless users ( already working with other APs in the plant)
I choose this model because in the manual appears 802.1X option for wireless security
but, when i try to create a SSID whit 802.1X , i can only see WEP, Dynamic WEP, WPA Personal and Enterprise
I naunual says that 802.1X is an option and must appear
I do know if i need to enable something previous to get that option ??
can someone point me in the right direction?
thanks in advance
Jorge Arenas
12-21-2011 07:30 AM
WPA Enterprise is 802.1x
12-21-2011 08:13 AM
Scott:
thanks for the quick response, only have another question, we use EAP (EAP-TLS )but when I choose WPA Enterprise, I only see WPA, WPA2, TKIP and CCMP AES options but not EAP options ( open system, shared key ,besides EAP, PEAP or mschap options, which are mentioned in the manual and normally we use to configure 802.1X)
The strange thing is, in the manual appears directly 802.1X and WPA Enterprise in the options of securtity, like diferent options with diferent parameters ( Page 61 of 541N Administration Guide (
there is something i need to pre-configure to get WPA enterprise with EAP parameters or to enable 802.1X option directly
thanks again
Jorge Arenas
12-21-2011 08:19 AM
Just choose either WPA or WPA2…. This will either make your security wpa/tkip or wpa2/aes. Both of these is 802.1x and you setup your radius for eap-tls if that is what you want to use.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide