08-04-2020 12:04 AM - edited 07-05-2021 12:21 PM
Hi All,
I've convert the CAPWAP AP to Mobility Express AP (Cisco 1850 , Firmware 8.10.122.0)everything look good but once I've connect to Web GUI , I'm not see the default AP (as I know the ME can work both AP and WLC). So how can I enable the AP function in the ME?
Solved! Go to Solution.
08-04-2020 05:47 AM
Once an AP is converted to ME, you cannot turn off the AP entity, so there isn't any functionality you need to enable.
The AP entity needs to have an IP Address, it will get one from the subnet used for the ME subnet management. So make sure you have a DHCP server on that subnet or set a manual IP address to the AP you can do that with the following commands:
log in to WLC
apciscoshell
log in to the AP entity
capwap ap ip <ip address> <nw mask> <gateway info>
08-04-2020 05:47 AM
Once an AP is converted to ME, you cannot turn off the AP entity, so there isn't any functionality you need to enable.
The AP entity needs to have an IP Address, it will get one from the subnet used for the ME subnet management. So make sure you have a DHCP server on that subnet or set a manual IP address to the AP you can do that with the following commands:
log in to WLC
apciscoshell
log in to the AP entity
capwap ap ip <ip address> <nw mask> <gateway info>
08-04-2020 11:49 PM
It's working after config the AP IP address, Thank you so much.
01-25-2022 07:41 AM
I have the same problem
I woul like to use my 1852i as normal acces point to share my internet connection
I have flash my ap whit the ME 8.10.151.0 version
my 1852 have static ip (fixed on AP and on my router) and I can login into the webgui but the AP list is empty ( as msompong1 image)
you say: log in to WLC but i not have cisco WLC just regular modem router
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide